"""Port configuration."""
# Copyright (C) 2015 Brad Cowie, Christopher Lorier and Joe Stringer.
# Copyright (C) 2015 Research and Education Advanced Network New Zealand Ltd.
# Copyright (C) 2015--2018 The Contributors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
from faucet.conf import Conf, InvalidConfigError, test_config_condition
from faucet import valve_of
STACK_STATE_ADMIN_DOWN = 0
STACK_STATE_INIT = 1
STACK_STATE_DOWN = 2
STACK_STATE_UP = 3
[docs]class Port(Conf):
"""Stores state for ports, including the configuration."""
defaults = {
'number': None,
'name': None,
'description': None,
'enabled': True,
'permanent_learn': False,
# if True, a host once learned on this port cannot be learned on another port.
'unicast_flood': True,
# if True, do classical unicast flooding on this port (False floods ND/ARP/bcast only).
'mirror': None,
# If set, mirror packets from that port to this one.
'native_vlan': None,
# Set untagged VLAN on this port.
'tagged_vlans': None,
# Set tagged VLANs on this port.
'acl_in': None,
'acls_in': None,
# ACL for input on this port.
'stack': None,
# Configure a stack peer on this port.
'max_hosts': 255,
# maximum number of hosts
'hairpin': False,
# if True, then switch unicast and flood between hosts on this port (eg WiFi radio).
'hairpin_unicast': False,
# if True, then switch unicast between hosts on this port (eg WiFi radio).
'lacp': 0,
# if non 0 (LAG ID), experimental LACP support enabled on this port.
'lacp_active': False,
# experimental active LACP
'loop_protect': False,
# if True, do simple (host/access port) loop protection on this port.
'loop_protect_external': False,
# if True, do external (other switch) loop protection on this port.
'output_only': False,
# if True, all packets input from this port are dropped.
'lldp_beacon': {},
# LLDP beacon configuration for this port.
'opstatus_reconf': True,
# If True, configure pipeline if operational status of port changes.
'receive_lldp': False,
# If True, receive LLDP on this port.
'override_output_port': None,
# If set, packets are sent to this other port.
'max_lldp_lost': 3,
# threshold before marking a stack port as down
'dot1x': False,
# If true, block this port until a successful 802.1x auth
}
defaults_types = {
'number': int,
'name': str,
'description': str,
'enabled': bool,
'permanent_learn': bool,
'unicast_flood': bool,
'mirror': (list, str, int),
'native_vlan': (str, int),
'tagged_vlans': list,
'acl_in': (str, int),
'acls_in': list,
'stack': dict,
'max_hosts': int,
'hairpin': bool,
'hairpin_unicast': bool,
'lacp': int,
'lacp_active': bool,
'loop_protect': bool,
'loop_protect_external': bool,
'output_only': bool,
'lldp_beacon': dict,
'opstatus_reconf': bool,
'receive_lldp': bool,
'override_output_port': (str, int),
'dot1x': bool,
'max_lldp_lost': int,
}
stack_defaults_types = {
'dp': str,
'port': (str, int),
}
lldp_beacon_defaults_types = {
'enable': bool,
'org_tlvs': list,
'system_name': str,
'port_descr': str,
}
lldp_org_tlv_defaults_types = {
'oui': (int, bytearray),
'subtype': (int, bytearray),
'info': (str, bytearray)
}
def __init__(self, _id, dp_id, conf=None):
self.acl_in = None
self.acls_in = None
self.description = None
self.dot1x = None
self.dp_id = None
self.enabled = None
self.hairpin = None
self.hairpin_unicast = None
self.lacp = None
self.lacp_active = None
self.loop_protect = None
self.loop_protect_external = None
self.max_hosts = None
self.max_lldp_lost = None
self.mirror = None
self.name = None
self.native_vlan = None
self.number = None
self.op_status_reconf = None
self.opstatus_reconf = None
self.output_only = None
self.override_output_port = None
self.permanent_learn = None
self.receive_lldp = None
self.stack = {}
self.unicast_flood = None
self.dyn_lacp_up = None
self.dyn_lacp_updated_time = None
self.dyn_last_ban_time = None
self.dyn_last_lacp_pkt = None
self.dyn_last_lldp_beacon_time = None
self.dyn_learn_ban_count = 0
self.dyn_phys_up = False
self.dyn_stack_current_state = STACK_STATE_DOWN
self.dyn_stack_probe_info = {}
self.tagged_vlans = []
self.lldp_beacon = {}
super(Port, self).__init__(_id, dp_id, conf)
# If the port is mirrored convert single attributes to a array
if self.mirror and not isinstance(self.mirror, list):
self.mirror = [self.mirror]
def __str__(self):
return 'Port %u' % self.number
def __repr__(self):
return self.__str__()
[docs] def set_defaults(self):
super(Port, self).set_defaults()
self._set_default('number', self._id)
self._set_default('name', str(self._id))
self._set_default('description', self.name)
self._set_default('tagged_vlans', [])
[docs] def check_config(self):
super(Port, self).check_config()
test_config_condition(not (isinstance(self.number, int) and self.number > 0 and (
not valve_of.ignore_port(self.number))), ('Port number invalid: %s' % self.number))
test_config_condition(
self.hairpin and self.hairpin_unicast,
'Cannot have both hairpin and hairpin_unicast enabled')
if self.dot1x:
test_config_condition(self.number > 65535, (
'802.1x not supported on ports > 65535'))
if self.mirror:
test_config_condition(self.tagged_vlans or self.native_vlan, (
'mirror port %s cannot have any VLANs assigned' % self))
if self.stack:
self._check_conf_types(self.stack, self.stack_defaults_types)
for stack_config in list(self.stack_defaults_types.keys()):
test_config_condition(stack_config not in self.stack, (
'stack %s must be defined' % stack_config))
if self.lldp_beacon:
self._check_conf_types(
self.lldp_beacon, self.lldp_beacon_defaults_types)
self.lldp_beacon = self._set_unknown_conf(
self.lldp_beacon, self.lldp_beacon_defaults_types)
if self.lldp_beacon_enabled():
if self.lldp_beacon['port_descr'] is None:
self.lldp_beacon['port_descr'] = self.description
org_tlvs = []
for org_tlv in self.lldp_beacon['org_tlvs']:
self._check_conf_types(org_tlv, self.lldp_org_tlv_defaults_types)
test_config_condition(len(org_tlv) != len(self.lldp_org_tlv_defaults_types), (
'missing org_tlv config'))
if not isinstance(org_tlv['info'], bytearray):
try:
org_tlv['info'] = bytearray.fromhex(
org_tlv['info']) # pytype: disable=missing-parameter
except ValueError:
org_tlv['info'] = org_tlv['info'].encode('utf-8')
if not isinstance(org_tlv['oui'], bytearray):
org_tlv['oui'] = bytearray.fromhex(
'%6.6x' % org_tlv['oui']) # pytype: disable=missing-parameter
org_tlvs.append(org_tlv)
self.lldp_beacon['org_tlvs'] = org_tlvs
if self.acl_in and self.acls_in:
raise InvalidConfigError('found both acl_in and acls_in, use only acls_in')
if self.acl_in and not isinstance(self.acl_in, list):
self.acls_in = [self.acl_in,]
self.acl_in = None
if self.acls_in:
for acl in self.acls_in:
test_config_condition(not isinstance(acl, (int, str)),
'ACL names must be int or str')
[docs] def finalize(self):
test_config_condition(not (self.vlans() or self.stack or self.output_only), (
'%s must have a VLAN, be a stack port, or have output_only: True' % self))
test_config_condition(self.vlans() and self.stack, (
'%s cannot have stack and VLANs on same port' % self))
if self.native_vlan:
test_config_condition(self.native_vlan in self.tagged_vlans, (
'cannot have same native and tagged VLAN on same port'))
self.tagged_vlans = tuple(self.tagged_vlans)
super(Port, self).finalize()
[docs] def running(self):
"""Return True if port enabled and up."""
return self.enabled and self.dyn_phys_up
[docs] def to_conf(self):
result = super(Port, self).to_conf()
if result is not None:
if 'stack' in result and result['stack']:
result['stack'] = {}
for stack_config in list(self.stack_defaults_types.keys()):
result['stack'][stack_config] = self.stack[stack_config]
if self.native_vlan is not None:
result['native_vlan'] = self.native_vlan.name
result['tagged_vlans'] = [vlan.name for vlan in self.tagged_vlans]
return result
[docs] def vlans(self):
"""Return all VLANs this port is in."""
if self.native_vlan is not None:
return (self.native_vlan,) + tuple(self.tagged_vlans)
return tuple(self.tagged_vlans)
[docs] def hosts(self, vlans=None):
"""Return all host cache entries this port has learned (on all or specified VLANs)."""
if vlans is None:
vlans = self.vlans()
hosts = []
for vlan in vlans:
hosts.extend([entry for entry in list(vlan.cached_hosts_on_port(self))])
return hosts
[docs] def hosts_count(self, vlans=None):
"""Return count of all hosts this port has learned (on all or specified VLANs)."""
if vlans is None:
vlans = self.vlans()
hosts_count = 0
for vlan in vlans:
hosts_count += vlan.cached_hosts_count_on_port(self)
return hosts_count
[docs] def lldp_beacon_enabled(self):
"""Return True if LLDP beacon enabled on this port."""
return self.lldp_beacon and self.lldp_beacon.get('enable', False)
[docs] def mirror_actions(self):
"""Return OF actions to mirror this port."""
if self.mirror is not None:
return [valve_of.output_port(mirror_port) for mirror_port in self.mirror]
return []
[docs] def is_stack_up(self):
"""Return True if port is in UP state."""
return self.dyn_stack_current_state == STACK_STATE_UP
[docs] def is_stack_down(self):
"""Return True if port is in DOWN state."""
return self.dyn_stack_current_state == STACK_STATE_DOWN
[docs] def is_stack_admin_down(self):
"""Return True if port is in ADMIN_DOWN state."""
return self.dyn_stack_current_state == STACK_STATE_ADMIN_DOWN
[docs] def is_stack_init(self):
"""Return True if port is in INIT state."""
return self.dyn_stack_current_state == STACK_STATE_INIT
[docs] def stack_up(self):
"""Change the current stack state to UP."""
self.dyn_stack_current_state = STACK_STATE_UP
[docs] def stack_down(self):
"""Change the current stack state to DOWN."""
self.dyn_stack_current_state = STACK_STATE_DOWN
[docs] def stack_admin_down(self):
"""Change the current stack state to ADMIN_DOWN."""
self.dyn_stack_current_state = STACK_STATE_ADMIN_DOWN
[docs] def stack_init(self):
"""Change the current stack state to INIT_DOWN."""
self.dyn_stack_current_state = STACK_STATE_INIT