"""Configuration for a datapath."""
# Copyright (C) 2015 Brad Cowie, Christopher Lorier and Joe Stringer.
# Copyright (C) 2015 Research and Education Advanced Network New Zealand Ltd.
# Copyright (C) 2015--2017 The Contributors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
import copy
import netaddr
from collections import namedtuple, defaultdict
from datadiff import diff
from netaddr.core import AddrFormatError
import networkx
from faucet import faucet_pipeline
from faucet import valve_acl
from faucet import valve_of
from faucet.conf import Conf, InvalidConfigError
from faucet.valve_table import ValveTable, ValveGroupTable
from faucet.valve_util import get_setting
from faucet.valve_packet import FAUCET_MAC
# Documentation generated using documentation_generator.py
# For attributues to be included in documentation they must
# have a default value, and their descriptor must come
# immediately after being set. See below for example.
[docs]class DP(Conf):
"""Stores state related to a datapath controlled by Faucet, including
configuration.
"""
acls = None
vlans = None
interfaces = None # config
interface_ranges = None
ports = None
routers = None
running = False
name = None
dp_id = None
cookie = None
configured = False
priority_offset = None
low_priority = None
high_priority = None
stack = None
stack_ports = None
output_only_ports = None
ignore_learn_ins = None
drop_broadcast_source_address = None
drop_spoofed_faucet_mac = None
drop_bpdu = None
drop_lldp = None
groups = None
group_table = False
group_table_routing = False
max_hosts_per_resolve_cycle = None
max_host_fib_retry_count = None
max_resolve_backoff_time = None
packetin_pps = None
learn_jitter = None
learn_ban_timeout = None
advertise_interval = None
proactive_learn = None
pipeline_config_dir = None
use_idle_timeout = None
tables = {} # type: dict
tables_by_id = {} # type: dict
meters = {} # type: dict
timeout = None
arp_neighbor_timeout = None
lldp_beacon = {} # type: dict
metrics_rate_limit_sec = None
faucet_dp_mac = None
combinatorial_port_flood = None
dyn_last_coldstart_time = None
# Values that are set to None will be set using set_defaults
# they are included here for testing and informational purposes
defaults = {
'dp_id': None,
# Name for this dp, used for stats reporting and configuration
'name': None,
'interfaces': {},
'interface_ranges': {},
# How much to offset default priority by
'priority_offset': 0,
# Some priority values
'lowest_priority': None,
'low_priority': None,
'high_priority': None,
'highest_priority': None,
'cookie': 1524372928,
# Identification cookie value to allow for multiple controllers to control the same datapath
'timeout': 300,
# inactive MAC timeout
'description': None,
# description, strictly informational
'hardware': 'Open vSwitch',
# The hardware maker (for chosing an openflow driver)
'arp_neighbor_timeout': 250,
# ARP and neighbor timeout (seconds)
'ofchannel_log': None,
# OF channel log
'stack': None,
# stacking config, when cross connecting multiple DPs
'ignore_learn_ins': 10,
# Ignore every approx nth packet for learning.
# 2 will ignore 1 out of 2 packets; 3 will ignore 1 out of 3 packets.
# This limits control plane activity when learning new hosts rapidly.
# Flooding will still be done by the dataplane even with a packet
# is ignored for learning purposes.
'drop_broadcast_source_address': True,
# By default drop packets with a broadcast source address
'drop_spoofed_faucet_mac': True,
# By default drop packets on datapath spoofing the FAUCET_MAC
'drop_bpdu': True,
# By default drop STP BPDU frames
'drop_lldp': True,
# By default, drop LLDP. Set to False, to enable NFV offload of LLDP.
'group_table': False,
# Use GROUP tables for VLAN flooding
'group_table_routing': False,
# Use GROUP tables for routing (nexthops)
'max_hosts_per_resolve_cycle': 5,
# Max hosts to try to resolve per gateway resolution cycle.
'max_host_fib_retry_count': 10,
# Max number of times to retry resolution of a host FIB route.
'max_resolve_backoff_time': 32,
# Max number of seconds to back off to when resolving nexthops.
'packetin_pps': 0,
# Ask switch to rate limit packet pps. TODO: Not supported by OVS in 2.7.0
'learn_jitter': 10,
# Jitter learn timeouts by up to this many seconds
'learn_ban_timeout': 10,
# When banning/limiting learning, wait this many seconds before learning can be retried
'advertise_interval': 30,
# How often to advertise (eg. IPv6 RAs)
'proactive_learn': True,
# whether proactive learning is enabled for IP nexthops
'pipeline_config_dir': get_setting('FAUCET_PIPELINE_DIR', True),
# where config files for pipeline are stored (if any).
'use_idle_timeout': False,
# Turn on/off the use of idle timeout for src_table, default OFF.
'lldp_beacon': {},
# Config for LLDP beacon service.
'metrics_rate_limit_sec': 0,
# Rate limit metric updates - don't update metrics if last update was less than this many seconds ago.
'faucet_dp_mac': FAUCET_MAC,
# MAC address of packets sent by FAUCET, not associated with any VLAN.
'combinatorial_port_flood': False,
# if True, use a seperate output flow for each input port on this VLAN.
}
defaults_types = {
'dp_id': int,
'name': str,
'interfaces': dict,
'interface_ranges': dict,
'priority_offset': int,
'lowest_priority': int,
'low_priority': int,
'high_priority': int,
'highest_priority': int,
'cookie': int,
'timeout': int,
'description': str,
'hardware': str,
'arp_neighbor_timeout': int,
'ofchannel_log': str,
'stack': dict,
'ignore_learn_ins': int,
'drop_broadcast_source_address': bool,
'drop_spoofed_faucet_mac': bool,
'drop_bpdu': bool,
'drop_lldp': bool,
'group_table': bool,
'group_table_routing': bool,
'max_hosts_per_resolve_cycle': int,
'max_host_fib_retry_count': int,
'max_resolve_backoff_time': int,
'packetin_pps': int,
'learn_jitter': int,
'learn_ban_timeout': int,
'advertise_interval': int,
'proactive_learn': bool,
'pipeline_config_dir': str,
'use_idle_timeout': bool,
'lldp_beacon': dict,
'metrics_rate_limit_sec': int,
'faucet_dp_mac': str,
'combinatorial_port_flood': bool,
}
stack_defaults_types = {
'priority': int,
}
lldp_beacon_defaults_types = {
'send_interval': int,
'max_per_interval': int,
'system_name': str,
}
wildcard_table = ValveTable(
valve_of.ofp.OFPTT_ALL, 'all', None, flow_cookie=0)
def __init__(self, _id, dp_id, conf):
"""Constructs a new DP object"""
super(DP, self).__init__(_id, dp_id, conf)
self.acls = {}
self.vlans = {}
self.ports = {}
self.routers = {}
self.stack_ports = []
self.output_only_ports = []
self.lldp_beacon_ports = []
def __str__(self):
return self.name
[docs] def check_config(self):
assert isinstance(self.dp_id, int), 'dp_id must be %s not %s' % (int, type(self.dp_id))
assert self.dp_id > 0 and self.dp_id <= 2**64-1, 'DP ID %s not in valid range' % self.dp_id
assert netaddr.valid_mac(self.faucet_dp_mac), 'invalid MAC address %s' % self.faucet_dp_mac
assert not (self.group_table and self.group_table_routing), (
'groups for routing and other functions simultaneously not supported')
assert (self.interfaces or self.interface_ranges), (
'DP %s must have at least one interface' % self)
# To prevent L2 learning from timing out before L3 can refresh
assert self.timeout >= self.arp_neighbor_timeout, 'L2 timeout must be >= L3 timeout'
if self.lldp_beacon:
self._check_conf_types(self.lldp_beacon, self.lldp_beacon_defaults_types)
assert 'send_interval' in self.lldp_beacon, (
'lldp_beacon send_interval not set')
assert 'max_per_interval' in self.lldp_beacon, (
'lldp_beacon max_per_interval not set')
self.lldp_beacon = self._set_unknown_conf(
self.lldp_beacon, self.lldp_beacon_defaults_types)
if self.lldp_beacon['system_name'] is None:
self.lldp_beacon['system_name'] = self.name
if self.stack:
self._check_conf_types(self.stack, self.stack_defaults_types)
def _configure_tables(self):
"""Configure FAUCET pipeline of tables with matches."""
self.groups = ValveGroupTable()
for table_id, table_config in enumerate(faucet_pipeline.FAUCET_PIPELINE):
table_name, restricted_match_types = table_config
self.tables[table_name] = ValveTable(
table_id, table_name, restricted_match_types,
self.cookie, notify_flow_removed=self.use_idle_timeout)
self.tables_by_id[table_id] = self.tables[table_name]
[docs] def set_defaults(self):
super(DP, self).set_defaults()
self._set_default('dp_id', self._id)
self._set_default('name', str(self._id))
self._set_default('lowest_priority', self.priority_offset)
self._set_default('low_priority', self.priority_offset + 9000)
self._set_default('high_priority', self.low_priority + 1)
self._set_default('highest_priority', self.high_priority + 98)
self._set_default('description', self.name)
self._configure_tables()
[docs] def match_tables(self, match_type):
"""Return list of tables with matches of a specific match type."""
match_tables = []
for table in list(self.tables_by_id.values()):
if table.restricted_match_types is not None:
if match_type in table.restricted_match_types:
match_tables.append(table)
else:
match_tables.append(table)
return match_tables
[docs] def in_port_tables(self):
"""Return list of tables that specify in_port as a match."""
return self.match_tables('in_port')
[docs] def vlan_match_tables(self):
"""Return list of tables that specify vlan_vid as a match."""
return self.match_tables('vlan_vid')
[docs] def all_valve_tables(self):
"""Return list of all Valve tables."""
return list(self.tables_by_id.values())
[docs] def add_acl(self, acl_ident, acl):
"""Add an ACL to this DP."""
self.acls[acl_ident] = acl
[docs] def add_router(self, router_ident, router):
"""Add a router to this DP."""
self.routers[router_ident] = router
[docs] def add_port(self, port):
"""Add a port to this DP."""
port_num = port.number
self.ports[port_num] = port
if port.output_only:
self.output_only_ports.append(port)
elif port.stack is not None:
self.stack_ports.append(port)
if port.lldp_beacon_enabled():
self.lldp_beacon_ports.append(port)
[docs] def resolve_stack_topology(self, dps):
"""Resolve inter-DP config for stacking."""
def canonical_edge(dp, port):
peer_dp = port.stack['dp']
peer_port = port.stack['port']
sort_edge_a = (
dp.name, port.name, dp, port)
sort_edge_z = (
peer_dp.name, peer_port.name, peer_dp, peer_port)
sorted_edge = sorted((sort_edge_a, sort_edge_z))
edge_a, edge_b = sorted_edge[0][2:], sorted_edge[1][2:]
return edge_a, edge_b
def make_edge_name(edge_a, edge_z):
edge_a_dp, edge_a_port = edge_a
edge_z_dp, edge_z_port = edge_z
return '%s:%s-%s:%s' % (
edge_a_dp.name, edge_a_port.name,
edge_z_dp.name, edge_z_port.name)
def make_edge_attr(edge_a, edge_z):
edge_a_dp, edge_a_port = edge_a
edge_z_dp, edge_z_port = edge_z
return {
'dp_a': edge_a_dp, 'port_a': edge_a_port,
'dp_z': edge_z_dp, 'port_z': edge_z_port}
root_dp = None
stack_dps = []
for dp in dps:
if dp.stack is not None:
stack_dps.append(dp)
if 'priority' in dp.stack:
assert dp.stack['priority'] > 0, 'stack priority must be > 0'
assert root_dp is None, 'cannot have multiple stack roots'
root_dp = dp
for vlan in list(dp.vlans.values()):
assert vlan.faucet_vips == [], 'routing + stacking not supported'
if root_dp is None:
assert not stack_dps, 'stacking enabled but no root_dp'
return
edge_count = {}
graph = networkx.MultiGraph()
for dp in dps:
if dp.stack_ports:
graph.add_node(dp.name)
for port in dp.stack_ports:
edge = canonical_edge(dp, port)
edge_a, edge_z = edge
edge_name = make_edge_name(edge_a, edge_z)
edge_attr = make_edge_attr(edge_a, edge_z)
edge_a_dp, _ = edge_a
edge_z_dp, _ = edge_z
if edge_name not in edge_count:
edge_count[edge_name] = 0
edge_count[edge_name] += 1
graph.add_edge(
edge_a_dp.name, edge_z_dp.name,
key=edge_name, port_map=edge_attr)
if graph.size():
for edge_name, count in list(edge_count.items()):
assert count == 2, '%s defined only in one direction' % edge_name
if self.name in graph:
if self.stack is None:
self.stack = {}
self.stack['root_dp'] = root_dp
self.stack['graph'] = graph
[docs] def shortest_path(self, dest_dp):
"""Return shortest path to a DP, as a list of DPs."""
if self.stack is None:
return None
return networkx.shortest_path(
self.stack['graph'], self.name, dest_dp)
[docs] def shortest_path_to_root(self):
"""Return shortest path to root DP, as list of DPs."""
if self.stack is not None:
root_dp = self.stack['root_dp']
if root_dp != self:
return self.shortest_path(root_dp.name)
return []
[docs] def peer_stack_up_ports(self, peer_dp):
"""Return list of stack ports that are up towards a peer."""
return [port for port in self.stack_ports if port.running() and port.stack['dp'].name == peer_dp]
[docs] def shortest_path_port(self, dest_dp):
"""Return first port on our DP, that is the shortest path towards dest DP."""
shortest_path = self.shortest_path(dest_dp)
if shortest_path is not None:
peer_dp = shortest_path[1]
peer_dp_ports = self.peer_stack_up_ports(peer_dp)
if peer_dp_ports:
return peer_dp_ports[0]
return None
[docs] def reset_refs(self, vlans=None):
if vlans is None:
vlans = self.vlans
self.vlans = {}
for vlan in list(vlans.values()):
vlan.reset_ports(list(self.ports.values()))
if vlan.get_ports():
self.vlans[vlan.vid] = vlan
[docs] def finalize_config(self, dps):
"""Perform consistency checks after initial config parsing."""
port_by_name = {}
dp_by_name = {}
vlan_by_name = {}
def resolve_port(port_name):
"""Resolve port by name or number."""
assert isinstance(port_name, (str, int)), (
'Port must be type %s or %s not %s' % (str, int, type(port_name)))
if port_name in port_by_name:
return port_by_name[port_name]
elif port_name in self.ports:
return self.ports[port_name]
return None
def resolve_ports(port_names):
"""Resolve list of ports, by port by name or number."""
resolved_ports = []
for port_name in port_names:
port = resolve_port(port_name)
if port is not None:
resolved_ports.append(port)
return resolved_ports
def resolve_port_numbers(port_names):
"""Resolve list of ports to numbers, by port by name or number."""
return [port.number for port in resolve_ports(port_names)]
def resolve_vlan(vlan_name):
"""Resolve VLAN by name or VID."""
assert isinstance(vlan_name, (str, int)), (
'VLAN must be type %s or %s not %s' % (str, int, type(vlan_name)))
if vlan_name in vlan_by_name:
return vlan_by_name[vlan_name]
elif vlan_name in self.vlans:
return self.vlans[vlan_name]
return None
def resolve_stack_dps():
"""Resolve DP references in stacking config."""
port_stack_dp = {}
for port in self.stack_ports:
stack_dp = port.stack['dp']
assert stack_dp in dp_by_name, 'stack DP %s not defined' % stack_dp
port_stack_dp[port] = dp_by_name[stack_dp]
for port, dp in list(port_stack_dp.items()):
port.stack['dp'] = dp
stack_port_name = port.stack['port']
assert stack_port_name in dp.ports, 'stack port %s not defined in DP %s' % (
stack_port_name, dp.name)
port.stack['port'] = dp.ports[stack_port_name]
def resolve_mirror_destinations():
"""Resolve mirror port references and destinations."""
mirror_from_port = defaultdict(list)
for mirror_port in list(self.ports.values()):
if mirror_port.mirror is not None:
mirrored_ports = resolve_ports(mirror_port.mirror)
assert len(mirrored_ports) == len(mirror_port.mirror), (
'port mirror not defined in DP %s' % self.name)
for mirrored_port in mirrored_ports:
mirror_from_port[mirrored_port].append(mirror_port)
# TODO: confusingly, mirror at config time means what ports to mirror from.
# But internally we use as a list of ports to mirror to.
for mirrored_port, mirror_ports in list(mirror_from_port.items()):
mirrored_port.mirror = []
for mirror_port in mirror_ports:
mirrored_port.mirror.append(mirror_port.number)
mirror_port.output_only = True
def resolve_override_output_ports():
"""Resolve override output ports."""
for port_no, port in list(self.ports.items()):
if port.override_output_port:
port.override_output_port = resolve_port(port.override_output_port)
assert port.override_output_port, (
'override_output_port port not defined')
self.ports[port_no] = port
def resolve_acl(acl_in):
"""Resolve an individual ACL."""
assert acl_in in self.acls, (
'missing ACL %s on %s' % (self.name, acl_in))
acl = self.acls[acl_in]
mirror_destinations = set()
def resolve_meter(_acl, action_conf):
meter_name = action_conf
assert meter_name in self.meters, (
'meter %s is not configured' % meter_name)
return action_conf
def resolve_mirror(acl, action_conf):
port_name = action_conf
port = resolve_port(port_name)
# If this DP does not have this port, do nothing.
if port is not None:
action_conf = port.number
mirror_destinations.add(port.number)
return action_conf
return None
def resolve_output(_acl, action_conf):
resolved_action_conf = {}
assert isinstance(action_conf, dict)
for output_action, output_action_values in list(action_conf.items()):
if output_action == 'port':
port_name = output_action_values
port = resolve_port(port_name)
# If this DP does not have this port, do not output.
if port is not None:
resolved_action_conf[output_action] = port.number
elif output_action == 'ports':
resolved_action_conf[output_action] = resolve_port_numbers(
output_action_values)
elif output_action == 'failover':
failover = output_action_values
assert isinstance(failover, dict)
resolved_action_conf[output_action] = {}
for failover_name, failover_values in list(failover.items()):
if failover_name == 'ports':
failover_values = resolve_port_numbers(failover_values)
resolved_action_conf[output_action][failover_name] = failover_values
else:
resolved_action_conf[output_action] = output_action_values
if resolved_action_conf:
return resolved_action_conf
return None
def resolve_noop(_acl, action_conf):
return action_conf
action_resolvers = {
'meter': resolve_meter,
'mirror': resolve_mirror,
'output': resolve_output,
'allow': resolve_noop,
'force_port_vlan': resolve_noop,
}
def build_acl(acl, vid=None):
"""Check that ACL can be built from config and mark mirror destinations."""
if acl.rules:
null_dp = namedtuple('null_dp', 'ofproto')
null_dp.ofproto = valve_of.ofp
try:
ofmsgs = valve_acl.build_acl_ofmsgs(
[acl], self.wildcard_table,
valve_of.goto_table(self.wildcard_table),
valve_of.goto_table(self.wildcard_table),
2**16-1, self.meters, acl.exact_match,
vlan_vid=vid)
assert ofmsgs
for ofmsg in ofmsgs:
ofmsg.datapath = null_dp
ofmsg.set_xid(0)
ofmsg.serialize()
except (AddrFormatError, KeyError, ValueError) as err:
raise InvalidConfigError(err)
for port_no in mirror_destinations:
port = self.ports[port_no]
port.output_only = True
for rule_conf in acl.rules:
for attrib, attrib_value in list(rule_conf.items()):
if attrib == 'actions':
resolved_actions = {}
assert isinstance(attrib_value, dict)
for action_name, action_conf in list(attrib_value.items()):
resolved_action_conf = action_resolvers[action_name](
acl, action_conf)
assert resolved_action_conf is not None, (
'cannot resolve ACL rule %s' % rule_conf)
resolved_actions[action_name] = resolved_action_conf
rule_conf[attrib] = resolved_actions
build_acl(acl, vid=1)
def verify_acl_exact_match(acls):
for acl in acls:
assert acl.exact_match == acls[0].exact_match, (
'ACLs when used together must have consistent exact_match')
def resolve_acls():
"""Resolve config references in ACLs."""
# TODO: move this config validation to ACL object.
for vlan in list(self.vlans.values()):
if vlan.acls_in:
acls = []
for acl in vlan.acls_in:
resolve_acl(acl)
acls.append(self.acls[acl])
vlan.acls_in = acls
verify_acl_exact_match(acls)
for port in list(self.ports.values()):
if port.acls_in:
acls = []
for acl in port.acls_in:
resolve_acl(acl)
acls.append(self.acls[acl])
port.acls_in = acls
verify_acl_exact_match(acls)
def resolve_vlan_names_in_routers():
"""Resolve VLAN references in routers."""
dp_routers = {}
for router_name, router in list(self.routers.items()):
vlans = []
for vlan_name in router.vlans:
vlan = resolve_vlan(vlan_name)
if vlan is not None:
vlans.append(vlan)
if len(vlans) > 1:
dp_router = copy.copy(router)
dp_router.vlans = vlans
dp_routers[router_name] = dp_router
self.routers = dp_routers
assert self.vlans, 'no VLANs referenced by interfaces in %s' % self.name
for port in list(self.ports.values()):
port_by_name[port.name] = port
for dp in dps:
dp_by_name[dp.name] = dp
for vlan in list(self.vlans.values()):
vlan_by_name[vlan.name] = vlan
resolve_stack_dps()
resolve_mirror_destinations()
resolve_override_output_ports()
resolve_vlan_names_in_routers()
resolve_acls()
bgp_vlans = self.bgp_vlans()
if bgp_vlans:
for vlan in bgp_vlans:
vlan_dps = [dp for dp in dps if vlan.vid in dp.vlans]
assert len(vlan_dps) == 1, (
'DPs %s sharing a BGP speaker VLAN is unsupported')
router_ids = set([vlan.bgp_routerid for vlan in bgp_vlans])
assert len(router_ids) == 1, 'BGP router IDs must all be the same'
bgp_ports = set([vlan.bgp_port for vlan in bgp_vlans])
assert len(bgp_ports) == 1, 'BGP ports must all be the same'
for vlan in bgp_vlans:
assert vlan.bgp_server_addresses == bgp_vlans[0].bgp_server_addresses, (
'BGP server addresses must all be the same')
for port in list(self.ports.values()):
port.finalize()
for vlan in list(self.vlans.values()):
vlan.finalize()
for acl in list(self.acls.values()):
acl.finalize()
for router in list(self.routers.values()):
router.finalize()
self.finalize()
[docs] def get_native_vlan(self, port_num):
"""Return native VLAN for a port by number, or None."""
if port_num in self.ports:
return self.ports[port_num].native_vlan
return None
[docs] def bgp_vlans(self):
"""Return list of VLANs with BGP enabled."""
return [vlan for vlan in list(self.vlans.values()) if vlan.bgp_as]
[docs] def to_conf(self):
"""Return DP config as dict."""
result = super(DP, self).to_conf()
if result is not None:
if 'stack' in result:
if result['stack'] is not None:
result['stack'] = {
'root_dp': str(self.stack['root_dp'])
}
interface_dict = {}
for port in list(self.ports.values()):
interface_dict[port.name] = port.to_conf()
result['interfaces'] = interface_dict
return result
[docs] def get_tables(self):
"""Return tables as dict for API call."""
result = {}
for table_name, table in list(self.tables.items()):
result[table_name] = table.table_id
return result
[docs] def get_config_dict(self):
"""Return DP config as a dict for API call."""
if self.name:
vlans_dict = {}
for vlan in list(self.vlans.values()):
vlans_dict[vlan.name] = vlan.to_conf()
acls_dict = {}
for acl_id, acl in list(self.acls.items()):
acls_dict[acl_id] = acl.to_conf()
return {
'dps': {self.name: self.to_conf()},
'vlans': vlans_dict,
'acls': acls_dict}
return {}
def _get_acl_config_changes(self, logger, new_dp):
"""Detect any config changes to ACLs.
Args:
logger (ValveLogger): logger instance.
new_dp (DP): new dataplane configuration.
Returns:
changed_acls (dict): ACL ID map to new/changed ACLs.
"""
changed_acls = {}
for acl_id, new_acl in list(new_dp.acls.items()):
if acl_id not in self.acls:
changed_acls[acl_id] = new_acl
logger.info('ACL %s new' % acl_id)
else:
if new_acl != self.acls[acl_id]:
changed_acls[acl_id] = new_acl
logger.info('ACL %s changed' % acl_id)
return changed_acls
def _get_vlan_config_changes(self, logger, new_dp):
"""Detect any config changes to VLANs.
Args:
logger (ValveLogger): logger instance.
new_dp (DP): new dataplane configuration.
Returns:
changes (tuple) of:
deleted_vlans (set): deleted VLAN IDs.
changed_vlans (set): changed/added VLAN IDs.
"""
deleted_vlans = set([])
for vid in list(self.vlans.keys()):
if vid not in new_dp.vlans:
deleted_vlans.add(vid)
changed_vlans = set([])
for vid, new_vlan in list(new_dp.vlans.items()):
if vid not in self.vlans:
changed_vlans.add(vid)
logger.info('VLAN %s added' % vid)
else:
old_vlan = self.vlans[vid]
if old_vlan != new_vlan:
if not old_vlan.ignore_subconf(new_vlan):
changed_vlans.add(vid)
logger.info('VLAN %s config changed' % vid)
else:
# Preserve current VLAN including current
# dynamic state like caches, if VLAN and ports
# did not change at all.
new_dp.vlans[vid].merge_dyn(old_vlan)
if not deleted_vlans and not changed_vlans:
logger.info('no VLAN config changes')
return (deleted_vlans, changed_vlans)
def _get_port_config_changes(self, logger, new_dp, changed_vlans, changed_acls):
"""Detect any config changes to ports.
Args:
logger (ValveLogger): logger instance.
new_dp (DP): new dataplane configuration.
changed_vlans (set): changed/added VLAN IDs.
changed_acls (dict): ACL ID map to new/changed ACLs.
Returns:
changes (tuple) of:
all_ports_changed (bool): True if all ports changed.
deleted_ports (set): deleted port numbers.
changed_ports (set): changed/added port numbers.
changed_acl_ports (set): changed ACL only port numbers.
"""
all_ports_changed = False
changed_ports = set([])
changed_acl_ports = set([])
for port_no, new_port in list(new_dp.ports.items()):
if port_no not in self.ports:
# Detected a newly configured port
changed_ports.add(port_no)
logger.info('port %s added' % port_no)
else:
old_port = self.ports[port_no]
# An existing port has configs changed
if new_port != old_port:
# ACL optimization - did the ACL, and only the ACL change.
if old_port.ignore_subconf(new_port, ignore_keys=set(['acls_in'])):
if old_port.acls_in != new_port.acls_in:
changed_acl_ports.add(port_no)
old_acl_ids = old_port.acls_in
if old_acl_ids:
old_acl_ids = [acl._id for acl in old_acl_ids]
new_acl_ids = new_port.acls_in
if new_acl_ids:
new_acl_ids = [acl._id for acl in new_acl_ids]
logger.info('port %s ACL changed (ACL %s to %s)' % (
port_no, old_acl_ids, new_acl_ids))
else:
changed_ports.add(port_no)
logger.info('port %s reconfigured (%s)' % (
port_no, diff(old_port.to_conf(), new_port.to_conf(), context=1)))
elif new_port.acls_in:
port_acls_changed = [acl for acl in new_port.acls_in if acl in changed_acls]
if port_acls_changed:
changed_acl_ports.add(port_no)
logger.info('port %s ACL changed (ACL %s content changed)' % (
port_no, port_acls_changed))
# TODO: optimize case where only VLAN ACL changed.
for vid in changed_vlans:
for port in new_dp.vlans[vid].get_ports():
changed_ports.add(port.number)
deleted_ports = set(list(self.ports.keys())) - set(list(new_dp.ports.keys()))
if deleted_ports:
logger.info('deleted ports: %s' % deleted_ports)
if changed_ports == set(new_dp.ports.keys()):
all_ports_changed = True
elif (not changed_ports and
not deleted_ports and
not changed_acl_ports):
logger.info('no port config changes')
return (all_ports_changed, deleted_ports,
changed_ports, changed_acl_ports)
[docs] def get_config_changes(self, logger, new_dp):
"""Detect any config changes.
Args:
logger (ValveLogger): logger instance
new_dp (DP): new dataplane configuration.
Returns:
(tuple): changes tuple containing:
deleted_ports (set): deleted port numbers.
changed_ports (set): changed/added port numbers.
changed_acl_ports (set): changed ACL only port numbers.
deleted_vlans (set): deleted VLAN IDs.
changed_vlans (set): changed/added VLAN IDs.
all_ports_changed (bool): True if all ports changed.
"""
if self.ignore_subconf(new_dp):
logger.info('DP base level config changed - requires cold start')
elif new_dp.routers != self.routers:
logger.info('DP routers config changed - requires cold start')
else:
changed_acls = self._get_acl_config_changes(logger, new_dp)
deleted_vlans, changed_vlans = self._get_vlan_config_changes(logger, new_dp)
(all_ports_changed, deleted_ports,
changed_ports, changed_acl_ports) = self._get_port_config_changes(
logger, new_dp, changed_vlans, changed_acls)
return (deleted_ports, changed_ports, changed_acl_ports,
deleted_vlans, changed_vlans, all_ports_changed)
# default cold start
return (set(), set(), set(), set(), set(), True)